SCHMETZ SPRING NEEDLE SIZE 80 1 NEEDLE PER PACK

Needle System: 130/705 H SPR

If you have never sewn using an Embroidery Spring Needle, beginning to work with one can feel somewhat unusual. Even the appearance of this special Universal Needle is greatly different from other needles: The spring that surrounds the needle takes on the function of the presser foot.

Sewing with Embroidery Spring Needles, also called freemotion sewing, needle painting, or freemotion quilting, is actually easier at the beginning if you increase the sewing speed significantly. To do so, the material must be moved slowly to prevent the stitch length from becoming too large. If you would like to start at a lower speed, we recommend moving the material very slowly, otherwise you run the risk of breaking the needle. Depending on the machine, you may have to reduce the thread tension (use a smaller number or turn to the left with older machines).

To be able to sew with the Embroidery Spring Needle, prepare your sewing machine as follows: Lower the feed dog as described in the operating instructions (you may not be able to lower it with certain types of machines; the feed dog toothing will be covered by a corresponding part). Remove the presser foot and lower the presser foot bar. Then insert the Embroidery Spring Needle and thread as usual. First apply a straight stitch and then begin with normal thread tension. We recommend doing your first stitching attempts on a scrap piece of fabric in order to check the thread tension. The stitch should look the same from both sides of the fabric.